Introduction: Automatic Plant Watering Alarm

Picture of Automatic Plant Watering Alarm

Description -

Moisture level is sensed by probes which are embedded in the soil. Be careful while inserting the probes they should inserted into a suitable depth and probes should be separated from each other. When there is no moisture in soil then Collector of Q1 becomes high and this signal goes to the base of Q2 and collector of Q2 become low and we are using this signal to turn on the buzzer.

Step 1: VIDEO

we uploaded circuit diagram , breadboard layout and every necessary information in our website please click here to visit

http://ddelectrotech.com/blog/plant-watering-alarm/

click to subscribe our youtube channel. SUBSCRIBE

Comments

About This Instructable

641views

13favorites

License:

Bio: Best Electronics Verified Projects Circuit, Code, Video | Latest Tutorial on Arduino , PIC ,8051 | New innovative ideas and more.
More by DDelectroTech:Dual Sim & SD Card Simultaneously on Xiaomi Redmi Note 3  step by step guidehow to make a universal usb pic programmer PICkit 2how to make a intelligent robot
Add instructable to: