With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Hello my name is Chipsy, I'm French, reading instructables since at least 2 years, it is the first entry i make on this website. Why i made this ...
The existing controller for the projector screen is an integrated circuit that drives the screen motor. It is controlled via an RF remote. I grabbed my multimeter, and was able to find ...
The idea with this circuit is being able to "sense" with the Arduino weither the projector screen is going UP or going DOWN. This circuit works like this ...
To control the motor, i will be using an H-bridge with a DPDT relay like you can see on this schematic below. If you want more details, look ...
Okay, so now we can tell the blind motor to go DOWN when the projector screen is going DOWN, We can tell him to go UP when the ...
I tested everything on a breadboard to develop the arduino code and debug. It took me 1 complete day, because it is easy to make mistakes with so ...
I won't detail this step, just transferring the parts, being careful not to overheat anything, and triple check before soldering.
Drink some Juice before the final test.
// Pins int dir = 2; int power = 3; int captor = 4; // Reed switch int captorVal = 0; // Analog pin to read screen DOWN ...
It was a fun project to make, i did some frustrating mistakes but in the end it just WORKS. Next steps for improvement : - Replace Arduino by ...
Easy, Reversible Motor Control for Arduino (or any Microcontroller)by nothinglabs
How to convert (almost) any 27 or 49 MHz RC Car into a Robotic carby dflam
Relay Module for Arduinoby rishabh8721
Another Chemical Agitatorby TSJWang
Controlling a relay board with an Arduino Unoby hzimmerman
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »