Picture of Awesome Nerf mod: connect your Nerf guns
I got to borrow a camera for this instructable:D borrowed being the key word:(               This Nerf mod will show you how to connect your Nerf guns. It is very simple and easy to make. It also is not permanent so you can change it whenever.
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
You need:
-Both Nerf Recon attachments (laser and flip up sight)
-Hot glue gun

Step 2: Take it apart

Picture of Take it apart
Unscrew the laser. Take out the part that connects to the rail. Unscrew the yellow piece. Take off the sight like in the picture.

Step 3: Glueing

Picture of Glueing
Hot glue the black piece to the base of the sight. Make sure you are careful and let it heat up first.

Step 4: Finish

Picture of Finish
After it dries, put it on the gun. I attached my Maverick to my Recon, but I am not sure how much weight it can hold. Also, look at the yellow part of the above picture.
wolf1121 year ago

i would like to say it is going to get moved around a lot from pumping

This looks awesome nice job buddy
Cool dude i'll have to do that!
scout1172 years ago
so awesome dude
this is it ( i couldnt find painters tape though ;(
That is AWESOME!!!
sub893 (author)  seanthesheep1013 years ago
mabye, you could try something else other than glue, mabye something that would hold up better... But for now I attached my maverick to my stampede!!!!!
It's like a death machine now!! Then I got bored and attached my RECON to my stapede! (Note: recon wasn't with the shoulder pad when I put it on my stampede.)
nerf-freak3 years ago
i modded my maverick, and the recon couldn't hold the weight. had to buy a new one :(
sub893 (author)  nerf-freak3 years ago
sorry, but did the recon or connector break because the connector needs strong glue.
Zcbohor3 years ago
you might wanna try to mod it again because it didnt work at all!!!
sub893 (author)  Zcbohor3 years ago
why not?
hot got 12 bulets !!!!
sub893 (author)  beechcraft183 years ago
It is soooooooooooooo cool!!!!!!!
(removed by author or community request)
sub893 (author)  DELETED_zcbaker3 years ago
you can actually put it back together just without the tactical rail.
(removed by author or community request)
sub893 (author)  DELETED_zcbaker3 years ago
You can connect the laser WITH the double sided tactical rail if you don't want to put on another gun
sub893 (author)  DELETED_zcbaker3 years ago
you can buy just the flip up sight on ebay for about 6 dollars (rip off) and use that tactical rail.
i found that hobby glue doesnt work so put blue tac around the edges to stable it the n put painters tape on it to keep it together...ill post a pic
i just ut on the glue but not hot glue just with hobby glue
sub893 (author)  seanthesheep1013 years ago
It might hold, but it could eventually break, so be careful.
sithlil3 years ago
works great. good use for the two crappy scope/lights the recon comes with. today i pwned my freinds with this cause i used a barricade and a stampede joined
SHOW SOME PICS MAN!!!!!!!!!!!!!!
sounds cool
i will.....
bty13 years ago
this is one of the best mods eva it works perfectlysub893
sub893 (author)  bty13 years ago
sub893 (author) 3 years ago
please comment on how it worked!