Introduction: Awesome Nerf Mod: Connect Your Nerf Guns

By
About: I like to make stuff

I got to borrow a camera for this instructable:D borrowed being the key word:(               This Nerf mod will show you how to connect your Nerf guns. It is very simple and easy to make. It also is not permanent so you can change it whenever.

Step 1: Materials

You need:
-Both Nerf Recon attachments (laser and flip up sight)
-Hot glue gun
-Screwdriver(s)

Step 2: Take It Apart

Unscrew the laser. Take out the part that connects to the rail. Unscrew the yellow piece. Take off the sight like in the picture.

Step 3: Glueing

Hot glue the black piece to the base of the sight. Make sure you are careful and let it heat up first.

Step 4: Finish

After it dries, put it on the gun. I attached my Maverick to my Recon, but I am not sure how much weight it can hold. Also, look at the yellow part of the above picture.