BBKWG mag mod

If you have built bakenbitz BBKWG you have probably found that the magazine is too wide and the ram rod sometimes does not hit the blue rods. here is how to fix that.

Step 1: Mod the mag

pic 1. what the mag looks like before the mods.
pic 2. change it to this, the mag after the mods.
pic 3. build the smaller mag pusher.

Comments

[knexjay]

is it possible that you can use 3-d connectors instead of withe connectors

[matstermind]

yes

[entenie-1995]

the gun is populair XD

[bakenbitz]

Good idea, I always wanted to change the way the mag was.

[jedff]

dosent look good soz

[bakenbitz]

Try it, you'd be surprised by how well it works

[jedff]

i have

[DrWeird117]

on your 9millie, how do you load and fire?

[jedff]

you pull the firing rod back then push the orange connecter up through the cut piece then pull the trigger and then it will fire bullets either green or white rods

[DrWeird117]

you didnt put in instructions on how to build the firing rod?

[jedff]

i did

[DrWeird117]

yeah, i figured it out. thanks, sorry

[amtdude]

does it still shoot rods or an orange conector with a green rod with a grey conector???

[matstermind]

blue rods. but I haven't tried the orange connector green rod grey connector method, so I don't know if that would work.

[Sylkhr]

no it doesn't , its slightly to big

[matstermind]

OK.

[Bright Shadow]

less power, but it's more painful

[Whaleman]

Good idea, but it should really be a forum.

[supergeek]

Thank you so much this really helped!!!