Print PDF
Favorite
Email
Step 5Propane hookup
Propane (not used in this build)
Follow the instructions in steps 1-3. In step 3 complete the connection of the bulk head fitting to the fire ring/bar, then attach the Venturi shown below to the bulkhead fitting. A 1/2 F npt to 45 deg flare threads on to the venturi to attach the hose to. The 30 psi Regulator has the needle valve attached to it, but this could also be placed at the BBQ for easy reach to adjust the flame size.
The venturi introduces air to the gas and takes the soot away. The one I sell has an adjustment nut to fine tune to your BBQ.
I used Teflon tape to seal all the NPT fittings.
Follow the instructions in steps 1-3. In step 3 complete the connection of the bulk head fitting to the fire ring/bar, then attach the Venturi shown below to the bulkhead fitting. A 1/2 F npt to 45 deg flare threads on to the venturi to attach the hose to. The 30 psi Regulator has the needle valve attached to it, but this could also be placed at the BBQ for easy reach to adjust the flame size.
The venturi introduces air to the gas and takes the soot away. The one I sell has an adjustment nut to fine tune to your BBQ.
I used Teflon tape to seal all the NPT fittings.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
