Introduction: BBR-V1

Picture of BBR-V1

BBR-V1
The BBR-V1 (bullpup bolt-action rifle version 1) is a true trigger, true bolt action bullpup rifle. at the moment it is at early stages and does not work very well and is not reliable, although i think it looks quite good. and with some adjustments, it could work very well. It shoots yellow rods and has a removable magazine with an internal pusher (not in pics) it doesn't use many pieces( I don't have a lot of pieces) and doesn't use any uncommon pieces like ball joints and hinges.this is my first k'nex gun and I have a second one coming which is named the SOBA Oodammo rifle.

Comments

Sharir1701 (author)2012-08-02

this gun is ok for a first. it's nothing too new, good or beautiful, but it's ok for a first. i read your other comment that you don't have many pieces. if you want, you can build my S2. it is one of the smallest pistols i've ever seen here, and it is my strongest weapon to date. it gets around 120 feet. if hinges or broken pieces are a problem, be told that all but one broken piece can be substituted (the bolt pin. the one that pushes the bullet up the ramp), and the four hinges for the trigger guard are unnecessary, because you can just remove the trigger guard. if you decide to build it, let me know, and maybe take a look at my other stuff too.

I.E. (author)Sharir17012012-08-03

I could have made it better with more pieces, making it better overall but unfortunately this gun used up all my pieces. I've seen your s1 rifle and it looks very nIce. I'm currently working on a bbr v2 and in this I'm trying to incorporate a better removable mag design and i think the gun design I've thought up of has never been done before... Anyway, thanks for the feedback

Sharir1701 (author)I.E.2012-08-03

check out my S2, not S1. it's much much smaller and much much better.

I.E. (author)Sharir17012012-08-03

I could have made it better with more pieces, making it better overall but unfortunately this gun used up all my pieces. I've seen your s1 rifle and it looks very n

I.E. (author)2012-05-31

It is only a concept for now but the problem is I don't have many pieces do I had to do a bad stock and I have to use minimal pieces so reliability is hard to do.

dr. richtofen (author)I.E.2012-06-03

Ok, I can understand that. You probably can get some pieces for very cheap on Ebay or so. For the next time, use the reply button (I get a mail then that you have commented me, so I can reply a bit quicker)

I.E. (author)dr. richtofen2012-08-03

Sorry, I'm new to instructables. I might go have a look at eBay and depending on the price i might buy some

dr. richtofen (author)2012-05-19

I like the concept. However, this looks very sloppy (stock especially the stock)
If you improve the stock, and make it more reliable, this gun could be very good!
4* for what it is now.

About This Instructable

367views

0favorites

License:

Bio: I.E. Innovation Engineering
Add instructable to: