Print PDF
Favorite
Email
Step 3Amplifier
I ordered a amplifier from ebay pretty cheap. It's aluminum casing was to big for my case so I took it apart and attached some old pentium2 coolers without the fans(cheeap on ebay). The whole assembly sits on a board which I screwed on top of the brackets I installed in the step earlier. To be able to use the volume and bass/treble controls when it is installed in the case, I desoldered the pieces and extended the cables. So I was able to install the the adjusters on the top corner of the case. It was a hell of a mess with some 36 cables.
I will be able to adjust the vol/treble/bass seperate for the two channels in case I only take one subwoofer with me. Installed in the case everything fits just perfect, but it's getting already pretty crammed in there.
I will be able to adjust the vol/treble/bass seperate for the two channels in case I only take one subwoofer with me. Installed in the case everything fits just perfect, but it's getting already pretty crammed in there.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 24, 2007. 6:29 PMdickerpenis
says:
He, yeah ich kenn den persönlich!!!!
Reply
 |
Add Comment
|
