Print PDF
Favorite
Email
Step 4LED sign.
Well a decent beatbox definitely needs some light to it. So considering what was given I came up with the idea to install a sign writing on the side of the case, using the already given holes around the case. So when the light is turned off, the writing is not to be seen.
To achive this it was eather using some 120 leds or doing some fibre optics which I could get my hands on. So it was down to the fibre optics. I drilled the holes, a lot ot fhem. Glued in the optics with hotglue (let it cool down a bit on the tip of the hotgluegun, or it will melt your fibre optics) and bundeled them to be lid by 5 leds. I made a special bracket to hold the leds in place.
To achive this it was eather using some 120 leds or doing some fibre optics which I could get my hands on. So it was down to the fibre optics. I drilled the holes, a lot ot fhem. Glued in the optics with hotglue (let it cool down a bit on the tip of the hotgluegun, or it will melt your fibre optics) and bundeled them to be lid by 5 leds. I made a special bracket to hold the leds in place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
