Introduction: BEAUTIFUL PLASTIC FLOWER
hai guys in this instructable i will show you how to make beautiful flowers with plastic. It is very simple and easy to make. the things you need to make this flower is listed below:
1) A PLASTIC COVER
2) WATER COLOUR
5) A BRUSH (to paint the flower)
Grab these things and lets make this flower.
Step 1: THE PART OF THE FIRST LAYER OF FLOWER
insert your thumb inside the cover and hold your thumb as shown in the picture.
Step 2: CUT THE PLASTIC TO MAKE THE FIRST LAYER
Now release your thumb from the cover and cut the portion that you are holding as shown in the picture.
Step 3: NOW THE REMAINING LAYERS
take the piece of plastic cover that you cut and insert it inside the another part of that plastic cover (in the first step the thumb is inserted, instead of thumb the plastic piece is inserted). it is shown in the picture. you have to hold and cut the cover as shown in the second picture. now you have two pieces of plastic cover, one above one. insert that two pieces like this inside another portion of the cover. then hold and cut that you did it before.
Step 4: INSERTING THREAD
now you should tie the bottom of all the pieces that arranged one above one with the thread as shown in the picture.
Step 5: SPLITTING THE LAYERS
now you have to split the layers softly by your fingers as shown in the picture. when this is done your plastic pieces will be looking like a flower. it is shown in the picture.
Step 6: COLOURING
you have to paint the flower with water colour using a brush. i had painted red you can paint your favorite colours also.you can paint with two colours, green with yellow that is your wish.
Step 7: FINISHED
so you make the plastic flower. don't touch the flower until the colour dry's. you can make many flowers, paint different colours and keep it in a vase pot or anything. it will be a decoration. ENJOY!!!