With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I made those earrings with beer cap and recycled copper.
MATERIALS: -2 beer cap (choose some with a nice inside color, some are bronze looking, choose those, not the iron looking); -copper wire (you can take it out ...
with the hammer flatten the cap on the piece of flat wood, before flatten the edges and after the middle, one side and after the other. (don't do ...
with a knives remove the plastic from the inside of the cap, then flatten again on an hard surface.
with the star screwdriver and the hammer make some holes in the cap, colored face up. then do smaller hole (beat less with the hammer) all around the ...
to bend the edges a little bit more use the flat screwdriver: beat it with the hammer all around the edges of the cap.
with the dremel clean the color of the cap away, or varnish it.
with the dremel smooth all the edges, also the ones of the holes
decorate the caps with the wire, insert it from one hole to the other (thread it 2 or 3 times), close it in the behind of the cap, ...
make a little ring with some wire and insert to one of the holes in the edge. insert earring hook in it.
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.