Print PDF
Favorite
Email
Step 4Drill holes in cap
Take a 1" pvc pipe cap from the plumbing dept and drill some holes in it. Two in the back one for the switch and one for the power cord.
Next 3 holes on the side. Two to put 2 little screws though. They will bite into the back of the bulb to hold it all together. and one for the bolt to go though to hold the conduit hanger to the cap.
Next 3 holes on the side. Two to put 2 little screws though. They will bite into the back of the bulb to hold it all together. and one for the bolt to go though to hold the conduit hanger to the cap.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
