BLINK LED USING AN ARDUINO

2,235

9

4

Published

Introduction: BLINK LED USING AN ARDUINO

ONE OF THE MICROCONTROLLER LOVED BY PEOPLE IS ARDUINO UNO.

People love to work with it.

One of the basic project to start is with blinking an led using an ARDUINO

In this page i have mentioned the procedure to be followed in details with easier steps.

steps:-

1.Components required

2.Circuit Diagram

constructing the circuit

4.Coding the microcontroller

5.Uploading

6.Quick Analysis

Step 1: COMPONENTS REQUIRED

Components required are as follows:-

1.ARDUINO UNO Microcontroller

2.Bread Board

3.Power supply cable or other suitable adapter

4.Resistors

5.Normal wires or Male to Male Wires for easier connection

6.LED

Step 2: Procedure:-

1.Rig up the circuit as in Circuit diagram .

2.Upload the programme in arduino software.

3.Upload programme using the cable connecting to microcontroller.

4.Once the uploading is done you can observe the blinking LED.

Step 3: UPLOADING PROGRAMME USING ARDUINO

How to upload has been given in videos i.e youtube link .

and the programme is provided in the attached arduino file above.

Step 4: Uploading Programme

For uploading the programme follow the steps provided in video.

once the programme is uploaded you can observe that led starts blinking.

THESE STEPS ARE EXPLAINED CLEARLY IN THE L

Share

    Recommendations

    • Planter Challenge

      Planter Challenge
    • Make it Move Contest

      Make it Move Contest
    • Woodworking Contest

      Woodworking Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    4 Comments

    Thanks brother..

    Thanks for compliments.. Sure I will enter this to contest