Instructables
Picture of BLOSSOM (Sidetable)
BLOSSOM_sd.jpg
BLOSSOM_det.jpg
BLOSSOM_top.jpg
BLOSSOM_etch.jpg
TABLETOPS.jpg
This is a side table made out of painted steel and hardwood cherry with a laser etched top of a cherry blossom branch.  The dimensions are:  24w x 10d x 36h.  First, I MIG welded the frame, then spray painted it.  Next, I milled the hardwood cherry, cut it to size, etched the cherry blossom silhouette on a Epilog Helix Laser Cutter, then lacquered the top.  Finally, I attached the top to the frame to complete the table.