Introduction: BOXZ_Creeper

Picture of BOXZ_Creeper




 
Here we have show how to build a BOXZ rob
https://www.instructables.com/id/BOXZ/

And this time, we would show how to make a skin!
This is the Creeper in Minecraft =_=#...


Size info:
The Cube of BOXZ: 128x128x128MM
The Skin of BOXZ: 130x130x130MM

Some more update:
http://letsmakerobots.com/node/34221

Everything you can find it here, include the drawing, arduino code and skin...Have fun!
Github
https://github.com/leolite/BOXZ

Author: Leo

License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0
http://creativecommons.org/licenses/by-nc-sa/3.0/

Some of Skins are reference from the web:
http://www.cubeecraft.com/

Step 1: Print the Skin

Picture of Print the Skin

We need colour print 3 piece of A4 paper

Step 2: Cut the Paper

Picture of Cut the Paper

Step 3: Tape the Skin

Picture of Tape the Skin

Step 4: Enjoy It!

Picture of Enjoy It!

Step 5: Some More?

Picture of Some More?

You can downlod our skin from Github

And now we make some BOXZ with Plexiglass to support more sensor!
And some more update and information, please visit here:
http://letsmakerobots.com/node/34221

Most of our public and update is here, but in Chinese
http://weibo.com/leolite

http://www.geek-workshop.com/forum-73-1.html

Comments

About This Instructable

1,734views

8favorites

License:

More by Leolite:BOXZ StyleBOXZ_CreeperBOXZ
Add instructable to: