Introduction: BRAID THAT OCTOPUS - a Craft Project for Kids Ages 4 -10
If your child is somewhat older, you can cater this project to their skill set by discussing the math involved. Whatever the age of your child, this project is intended for kids between the ages of 4 – 10 years old.
Supplies and Tools
1. Yarn
2. Scissors
3. Ruler/Measuring Tape
4. Glue Gun
5. 9 Rubber Bands
Step 1: Cut the Yarn
------------------------------------------------------
Cater the yarn to your child’s abilities
• Yarn that is thick and tightly wound is often easier for little fingers to deal with. Working with fuzzy or loose yarn can be frustrating for young kids.
Talk numbers with your child
• If your child is a bit older, allow her to measure and cut the yarn. Ask her questions about the math involved. For example, “Each section of the leg has 3 strands of yarn. There are 3 sections to every leg. How many strands of yarn will we have per leg?” [3x3=9 strands of yarn per leg] If we want 8 legs and there are 9 strands of yarn per leg, how many strands of yarn do we need?” [8 x 9 = 36 strands total] “We know that there are 12 inches in a foot and we want each strand of yarn to be approximately 36 inches. So how many feet will there be in each strand?” [36 ÷ 12 = 3 feet per strand, approximately]
Step 2: Secure the Ends of Each Leg
Unless your child is very mature, I recommend that an adult hot glue the ends of the strands together. Sometimes glue guns can get pretty hot and you don’t want your child burning herself. To keep her busy, ask her about what she wants her octopus to look like – will it have button eyes, ribbons on the feet, glittery hair, etc…?
Step 3: Create the Head of the Octopus
With your remaining yarn, make a spherical shape. Wrap the yarn around your fingers several times – use about 1/3 of the left over yarn. Then, slip the yarn off your fingers and use the remaining 2/3 to wrap the yarn ball in a circular motion until all of the left over yarn is used on the spherical shape. This spherical shape will be the head of your octopus. Glue the end of the yarn down with your glue gun.
Step 4: Glue the Legs to the Head
One-by-one, fold the 12 sets of legs over the head and glue them in place.
Step 5: Secure the Legs
Take one of your rubber bands and secure the legs by placing a rubber band at the base of the head, around the legs.
Step 6:
Take three sets of legs and with your child watching closely, demonstrate how to braid. When you have reached the end of the completed octopus leg, tie it off with a rubber band and cut the excess off.
Step 7:
Stay close-by and watch your child – make sure she understands what you just showed her.
Keep in mind that many young children have a difficult time tying off the end of the leg after they have finished braiding it. When she has reached the end of the leg, ask her to bring the octopus back to you so you can tie it off. At this point, you can pick out three more sets that are close to one another and tell her to braid those. Continue this process until all eight legs have been braided
Step 8: Jazz It Up!
Now your child knows how to braid and they have a
fun, unique octopus to talk about at show-and-tell!