Need something to display your business cards on your desk. How about this eco-friendly Business Card Stand. I am making this from things found around my house. You can use different material than I use as long as you keep within the general design.
I will be making two different card holder using different material but the same design.
I like holder 2 (see step 6) better because it has an almost invisible look. Like your cards are floating.
I will be making two different card holder using different material but the same design.
I like holder 2 (see step 6) better because it has an almost invisible look. Like your cards are floating.
Remove these ads by
Signing UpStep 1: Get the stuff
I am using things that I found around my house.
The fist card holder I am making I will be using a Granola Bar box that was in my recycle box.
The second card holder I am using a small pop bottle that was on my desk.
I picked up some tools that I think I will need.
- Scissors
- Box Cutter
- Tape
The fist card holder I am making I will be using a Granola Bar box that was in my recycle box.
The second card holder I am using a small pop bottle that was on my desk.
I picked up some tools that I think I will need.
- Scissors
- Box Cutter
- Tape
Flag this comment as:
Not NiceInappropriateSpam
243
Phil B
says:
Jun 7, 2009. 7:03 AMReplyWhile it is commendable and clever to use recycled material, you give your business cards to people whom you want to have a positive impression of you. Business card holders made from cheap looking materials may not convey the impression you want.
Luueliza
in reply to Apr 5, 2012. 4:14 PMReply
I would just like to add that a friend of mine sells upcycled art and runs courses on different techniques and arts. She does the odd show here and there to promote herself and these would be perfect! They would work perfectly for recycling artists/designers :)
17
lebowski
says:
May 12, 2009. 11:21 AMReplyWhy are all of your pictures so blurry?
4
agnivohneb (author)
in reply to May 12, 2009. 1:35 PMReply
I was doing this in a dark area of the room so my camera was unable to auto focus properly. I need to get a lamp or something on my desk.
17
lebowski
in reply to May 12, 2009. 1:46 PMReplyA flash might help too. It looks like you have put a lot of work into this Instructable.
4
agnivohneb (author)
in reply to May 12, 2009. 9:46 PMReply
I was using a flash but my camera focuses just before the flash and when it can't see very well it assumes that the object is about 5 ft away. My camera sucks. Saving up for a new SRL soon.
49
lemonie
in reply to May 12, 2009. 12:34 PMReplySo you can't read what's on the business cards L
49
lemonie
says:
May 12, 2009. 12:39 PMReplyHi Ben, Did you try this with a flash and find the cards whited-out? I think the image problem may be down to low light and a slow-shutter, or maybe just too close to the lens. One fix is to take on max-res from further away then crop a lower-res image from that. L
Visit Our Store »
Go Pro Today »
