Backyard Theater

First time/long time...Inspired by the Guerrilla Drive-in Instructable by plusbryan, I built a temporary backyard theater. This Instructable will cover the basics on building a projection screen that won't break a budget or be pushed around by an evening breeze.

Step 1: Materials

My vision was a 8' x 16' screen. At the local Lowes I purchased:

4) 4' x 8' sheets of 7/16 OSB ($7 per sheet)
3) 10' 2 x4's ($3-4 per board)
8) 8' 2 x 4's ($2-3 per board)
1) Box of 1 5/8" dry wall screws (coarse thread) ($5/box)
1) tube of painters caulk ($2/tube)
1) partial can of white-ish paint I had around.

Tools --
skill saw
screw gun
tape measure
speed square
various clamps


Other items needed for the final event were donated by friends or I had already

DVD player and amp
Speakers + 50' of speaker wire
Raiders of the Lost Ark DVD
HD Projector (courtesy of my employer).

Comments

[DavidRobertson]

FFS IT'S GUERILLA NOT GORILLA!!!  

[hbjngf]

lol captain Ron

[MedMisfit]

Lighten up, Francis.

[static]

Periodically the powers that be ask for suggestions of what to do out at the local township lake to get more people out there to "recreation".  Next time I'm going to suggest building a movie screen and purchasing a projector to rent out. However I can hear them now complaining how about how the hoodlums might  tear it up.  That is a very real possibility, but I growing tired of this down letting what may happen from doing anything interesting.  Anyway a good instructable of how you did yours, thanks for taking the time to document it.

[mccoy31]

Do you live in my town? LOL.

[mgauvin8810]

There is a company in NJ that's sells White Tarps (like the more common blue or green ones with the grommet holes). I used one of those for a couple of summer's showing Nascar night races, I think it was 16'x30' for about $60.00

[porcupinemamma]

This looks like so much fun!!! Could you please tell me more about the projector, and how it is used with the DVD player? I'm not technically competent, if you could explain in really basic terms, I'd really appreciate it.  Also, roughly, what would the projector cost, and where can a person purchase one?

[chaydgb]

Projectors connect to the DVD player in much the same way as a TV, the only difference being that they (generally) don't have speakers built in (the ones that do generally have small speakers that are more suited to indoor use) - so you also have to means to amplify the sound, such as a stereo / Hi Fi / amplifier with an external input, plus some speakers. For oudtoor use, you may need quite a bright projector (they are rated (and priced) by the number of lumens they put out) unfortunately this would mean more money. These can be brought new from electronics / computer stores like Best Buy, or you could pick up a second-hand one on eBay for much less (although the problem then is that the bulb may be nearing the end of its life and they are expensive to replace, so it may be a false economy).

[porcupinemamma]

Thanks a lot for helping me understand.  Did I mention that my friend converted his garage into a drive -in movie theater?  Well.. the car was NOT turned on, but everyone huddled in to the car and ate popcorn and licorice and drank pop and watched old black and white movies. I love stuff like that.

[CallMeJeremy]

One thing you might want to look at for improving your screen next year is shower board. It's the glossy white laminate you normally use to create a custom shower surround. It's about $10 per 4'x8' sheet - works great as a dry erase board and as a projector surface too - though I wouldn't write on it if you dedicated it's use to a projector. Nice project!

[kcls]

Great job! Did you only use it once?

[HandyMan1959]

For those that want a better experience check out www.screenpaintsupply.com/  They have a white reflective paint that will make it more like what you get in the theator.

[Sakla]

Nice.  I couldn't build a permanent screen in the backyard because there are times of the year with SEVERE wind.

I did build an 8' x 4' screen with melamine that I would roll out on wheels.

Then I built a screen that I can assemble in 15 minutes.  The frame is made of 3/4" EMT conduit.   The screen material is 15' x 12' piece of painters drop cloth (grommetted) that I attached to the frame with those ball bungee cords.

I couldn't be happier.  I was at first afraid that I would see the seams of the canvas -- happy to say I can't.  The dimensions are great because I not only can see current 16:9 ratio films on the "big screen" but I can also watch 4:3 TV shows (and some older films like "The Shining" ) on the "big screen".

Cost be about $120 to build.

[FrenchCrawler]

Great job... I did a similar version to this about 1 year ago. My screen came out to be the same size: 8' high and 12' wide (made up of three 8'x4' sheets). It was gonna be temp, but became perm. after we discovered how heavy it was. Stood for the longest time, until we had a storm with strong winds (half asleep, heard huge bang, went back to sleep knowing it was the screen). This summer bought some white movie canvas off off ebay and planted some PVC pipes to hold the material. Works out great (especially since there's no lines in the picture now).

[Greasetattoo]

Hey FrenchCrawler,

I did a search on Ebay for movie canvas.
Nothing came up!
What exactly is Movie canvas.
Or just regular canvas.
thanks

Oh, GREAT instructable  Medmisfit!

[5533888]

Cool!!  My friends have a large barn like garage and every tear they put a movie on it with there projector. I Just did an Instructable on how to go to the drive-in with style, you should check it out. 

[zigzagchris]

hmm so u live in below the equator or did u just take a while to put this up?

[zascecs]

Weapons of mass construction, good one! 

[uncle_al_0]

If I were you I would have used 1/2 inch MDF (about $10 per sheet where I live) for the screen because it has a finished surface and doesn't show the large chips of wood in it. Then I would have used a little wood filler in the gaps before painting.

[mg0930mg]

That's exactly what I want to do. Thank you.

[bloomautomatic]

Nice work. If anyone wants to go really cheap and easy, white shower curtain liners make nice screens. hang them off the awning, the gutter, or wherever and you're set. tape 2 together for a screen of about 6'x12'. check out www.backyardtheater.com for more ideas. we did two movies last summer and they were huge hits. plan to do many more this year.

[DIY Dave]

cool

[marcintosh]

You might like to use MDO. It stands for Medium Density Overlay. It's used for signs ( stop, yield etc.) It's available in 1/2 and 3/4 thicknesses and 4x8 sizes. It's a bit more pricey but lasts a long long time and is very smooth. You could edge seal the panels with epoxy as well but that's kind of gilding the lilly. Think about using one of the newer high performance construction glues to avoid screw heads. Just a thought

[Gamer6460]

Thats a really good idea, I think I'll have to build one of those when the weather gets warmer.

[PerfectlySquare]

Speaking of faces melting off... Wasabi popcorn? ;)

[vaxjo]

I have a similar screen in my Odeon: it's a piece of OSB (similar to plywood) but rather than paint it I stretched a sheet of blackout fabric (which is white and, I believe, is designed to go behind curtains) over the front of it to project onto. As long as there are no wrinkles in the sheet (which is pretty easy to do) it works quite well.