With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a tutorial on how to make an adorable bacon ornament! It makes a finished piece about 5 x 2″ with a 3.5″ ribbon to hang it. Materials ...
Cut out the six pieces of felt. The red pieces of felt should be about 2.5 inches x 5 or 6 inches. You can use this pattern, or improvise with your ow...
Using Pins to hold them in place, stitch the Color 2 pieces onto the red felt using a overcast stitch. I made the stitch very wide to add to the rippl...
Fold your ribbon in half and sandwich it between the stitched pieces of felt. The sides with the stitched designs (the ‘right sides’) should be facing...
Stitch the sides and top, and leave the bottom open. Make sure to stitch right through the green ribbon. Be sure to backstitch the seams so they do...
Turn the piece inside out by pulling the ribbon through the bottom. Try not to stress the opening too much when you turn it inside out.
Create a rectangle of wire that will fit inside. Make it big enough to stay at the edges. You can put a bit of cotton batting in to puff the piece ...
Tuck in the bottom seam and use a ladder stitch to close it. Then, bend and fold the wire and crumple the bacon a bit to give the edges a nice curl. ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »