Introduction: Bad Piggies Omnidirectional Helicopter

Picture of Bad Piggies Omnidirectional Helicopter

This helicopter can go up, down, left, and right.
It also has the unique ability to hover in place due to a perfect weight and bottom propellers.

Step 1: The Frame

Picture of The Frame

Build 3 columns from thermal squares 3 blocks high. Space them 1 block apart. Connect them at the top with 2 metal squares

Step 2: The Engines

Picture of The Engines

Ad the strongest engine types at the top and bottom of each column.

Step 3: Springs

Picture of Springs

Add 4 springs between the columns. These add weight for stable hovering.

Step 4: Lift

Picture of Lift

Add two large propellers on the top of the left and right columns, an place the smaller ones between them.

Step 5: Steering and Hovering Propellers

Picture of Steering and Hovering Propellers

Place one small propeller on each side for steering. Add a small propeller at the bottom of each propeller. When these are activated it will balance out the lift and the helicopter will fly in place.

Step 6: Add the Pig and Fly

Picture of Add the Pig and Fly

After adding the pig take the new vehicle for a fly. Turn on all propellers and it will fly in place. Turn on he top ones only for lift. Use the side propellers to steer.

Thank You

Comments

jallred274 (author)2014-02-04

I made this in field of dreams

kbrunner (author)2014-02-03

Where did you get 12 engines?!? (Guilty!!!)

About This Instructable

1,333views

9favorites

License:

More by jallred274:How to Reach Arena 7 in Clash RoyaleArduino Spectrum SliderHow To Win Flappy Bird Every Time
Add instructable to: