Print PDF
Favorite
Email
Step 4Solder slave board
Solder:
-- the four pins of the right angle header onto slave board.
-- a jumper wire to pin2 of the right angle header. Leave the other end of the jumper free for now.
-- resistor R2 to pin3 of the right angle header. Make sure the other end of the resistor can reach the LED lead. Leave that end of the resistor free for now.
-- the four pins of the right angle header onto slave board.
-- a jumper wire to pin2 of the right angle header. Leave the other end of the jumper free for now.
-- resistor R2 to pin3 of the right angle header. Make sure the other end of the resistor can reach the LED lead. Leave that end of the resistor free for now.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
