Print PDF
Favorite
Email
Step 8Drill holes into the epoxy putty for the wires!
I will illustrate this step using pictures and notes as it's the easiest thing to do. :D
For the back of the chair and the helmet, drill holes as described in pictures 1 & 2.
For the leg electrode, drill holes as described in picture 3.
You will need a minimum of four holes on the back of the chair, four holes in the helmet (two on top and two on one side), and two holes side by side on the leg electrode.
For the back of the chair and the helmet, drill holes as described in pictures 1 & 2.
For the leg electrode, drill holes as described in picture 3.
You will need a minimum of four holes on the back of the chair, four holes in the helmet (two on top and two on one side), and two holes side by side on the leg electrode.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
