Introduction: Barret 50. Cal

Hello again, again, this is the Barret 50 cal, CoD players probably will know it, and although I don't play CoD at all, I decided to make this gun. It was a hell to build because you have to find a good barrel, and I fail in barrels, sooo yeah... But anyway, I made it, and it works great for me! Only the scope sucks but you can make your one if you want. The stock is filmsy as hell but I didn't want a heavy stock that breaks of the main body all the time.
Please, rate, so want you think, and it would be great if you subscribe.

THERE ARE 'IBLES NOW! https://www.instructables.com/id/Knex-Barret-50-cal/
NOTE: IF YOU'RE BUILDING THIS GUN REMAKE THE TRIGGER MECH BECAUSE IT ISN'T POWERFULL+IT ISN'T PLACED FAR BACK, THIS MAKE THE RANGE WAYY BETTER.
Maybe I'll post sum pics.

(maybe)

Comments

author
knex builder. (author)2014-12-20

i built this gun and mine shoots better at least 10 meters

check it out

author
Lucas The Boss (author)2013-11-11

Looks great I am currently building my own Barrett 50 cal
Your barrel looks a little flimsy though does that not decrease accuracy, I would reinforce the barrel by adding a extra layer and not use red rods. Over all awesome gun :)

author
Kona-chan (author)2013-05-25

i love the laser pointer,
and that gun is brute force!
i always use it in MW2 if i go sniping
i use a damned silencer~

author
PotatoCoffee (author)2012-08-23

I'm impressed!

author
33devon (author)2011-10-26

how do i load the gun (i mean how do i pull the firing pin back will the scope is above it)

author
Sharir1701 (author)2011-10-18

amazing work !!!

author
mahmel (author)Sharir17012011-10-19

thanks!

author
bfhben (author)2011-08-20

build the intervention

author
mahmel (author)bfhben2011-08-21

The stock is too hard and it'll have the same barrel so it won't be too different. Maybe if I got spare time

author
mahmel (author)2011-06-16

Hmm I agree that the mech isn't the best but it's not weak..

author
sniper_lover (author)2011-05-17

yeeeaahhhh, post it plzz!!

author
mahmel (author)sniper_lover2011-05-17

It's long posted dude, hahahah:P

author
pinderfish (author)2011-01-21

oh my god............ :) its amazing 5* i wish i had that many pieces (spare) still its the best knex gun i have ever seen in my opinion

author
mahmel (author)pinderfish2011-01-21

Thank you so much! Yeah it's not your fault, this gun uses way too much yellow connectors and smaal rods :(

author
pinderfish (author)mahmel2011-04-23

haahahahahaah i have enough spare pieces to build it now!!!!!!!!!!!!!!!!!!!!!!!!

author
mahmel (author)pinderfish2011-04-24

Yay! Good luck

author
beanieostrich (author)2011-03-02

Geez, that thing is EPIK!!! I will make on if the instructions are posted and the range is over 100 ft. 5*

author
mahmel (author)beanieostrich2011-03-03

Well unfortunately it doesn't shoot 100ft:P But if you reamke the trigger mech, place it further back you can reach a greater range than only 24 feet

author
beanieostrich (author)mahmel2011-03-03

I did find the 'ible for this. I probably could make it fire more than 25 ft.

author
james4 (author)beanieostrich2011-03-23

PLZ give me the link to the instructions

author
beanieostrich (author)james42011-03-23

Here it is.

author
james4 (author)beanieostrich2011-03-23

thx

author
mahmel (author)beanieostrich2011-03-04

ye.. Maybe I'll remake the gun and make it better myself, but I don't have plenty of time..:(

author
mahmel (author)2011-02-20

How comes? This is one of the oldest, easiliest mech:s What about tape the connections with the two-way-dark-connector?

author
mahmel (author)2011-02-19

You mean the whole gun broke? The body is very strong, how comes yours blew up? Or the pin (guide)? Coz the pin guide isn't very good and powerfull.
But the whole gun?:S

author
MegaMetal8 (author)2011-01-07

Aboulutely 100% AMAZING

Dude your a legend 5*

author
mahmel (author)MegaMetal82011-01-07

Well, thank you very much. But 'a legend'? :P Hahaha

author
MegaMetal8 (author)mahmel2011-01-09

:-)

author
H1T4TCH1 (author)2011-01-05

Definately post!!!!

You been doing a good job with your new creations!!!

author
mahmel (author)H1T4TCH12011-01-05

Thanks you very very much! And yes this time I'm gonna make instructions, but I not very soon, I don't have very much time on my hands.. :(

author
H1T4TCH1 (author)mahmel2011-01-05

ahw, that's very pity :(

i want to build it when you posted :D

but err... does it have a strong (not bending) fake barrel???

author
mahmel (author)H1T4TCH12011-01-05

Oh yes I don't at all! But the bullet sometimes get stuck at the orange connectors in the barrel, but I use always sharpened rods so I don't have that problem.

author
H1T4TCH1 (author)mahmel2011-01-06

Ok, thanks :-)

author
me is assisin (author)2011-01-06

100% win

author
shadowninja31 (author)2011-01-05

Cool.

author
~KGB~ (author)2011-01-05

epik! love it! 5*

author
mahmel (author)~KGB~2011-01-05

Thanks! Have you rate it? Because the rating is now 4.09 with 1 rating... That's a bit weird :S

author
~KGB~ (author)mahmel2011-01-05

no prob! i know, new system

author
Vynash (author)2011-01-05

Awesome!

About This Instructable

10,118views

4favorites

License:

More by mahmel:Knex L96A1Knex Barret 50 cal.Barret 50. cal
Add instructable to: