Introduction: Basic Rainbow Loom Bracelet

Step 1: Step 1

Making sure the pins are facing down , place your first rubber band on the loom.

Step 2: Step 2

Place the second rubber band on the loom.

Step 3: Step 3

Continue the pattern until you reach the end of the loom

Step 4:

When you have finished this part it should look like this.

Step 5: Step 5

Flip the loom over so that the pins are facing up. Bring the second band up and over to the other side.

Step 6: Step 6

Bring the third band up and over just like you did with the second band.

Step 7: Step 7

Continue the pattern until you get to the end of the loom.

Step 8:

When you get to the end it should look like this.

Step 9: Step 9

Take your clip and attach it to the band on the end . You can now pull the bracelet off the loom. When you have done that you can attach the other end to the clip.

Step 10:

This should be the end result

Comments