Introduction: Batman Fidget Spinner

Picture of Batman Fidget Spinner

This Batman Fidget Spinner (with beveled edges) uses three 608 Bearings. The secondary Bearings are aligned on the horizontal axis for balanced spinning. Bearing pin fits snug and does not interfere with the spin.

Spinner is 7mm thick. Bearing holes are 22mm in diameter. It is designed in Tinkercad.

Step 1: Download. Print. Assemble

Download the files and print the spinner.


Swansong (author)2017-08-04

That's a neat spinner design :)

About This Instructable



More by Creator324:Hex Fidget SpinnerTri SpinnerBatman Fidget Spinner
Add instructable to: