Print PDF
Favorite
Email
Step 8Sew in Sonar Range Finder
Attach the Maxbotix range finder to the coat using project thread to the attachment holes.
Sew the + on the range finder to +5V on main board
Sew the GND on Maxbotix to the - on main board
Sew the AN on Maxbotix to analog pin 0 on the main board
Sew the + on the range finder to +5V on main board
Sew the GND on Maxbotix to the - on main board
Sew the AN on Maxbotix to analog pin 0 on the main board
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
