Print PDF
Favorite
Email
Step 12Apply heat shrink to the robotic arms
Position tubing to cover joints. A gap may be left near LED end for aesthetics
Use a lighter to shrink tubing
Make sure to keep the flame slightly away from work and move it in sideways towards tubing
Use the side of the flame rather than the tip to prevent blackening
Do it in small portions
Optional: Use a heat gun if available
Use a lighter to shrink tubing
Make sure to keep the flame slightly away from work and move it in sideways towards tubing
Use the side of the flame rather than the tip to prevent blackening
Do it in small portions
Optional: Use a heat gun if available
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
