Print PDF
Favorite
Email
Step 1Gather materials and resources
First you need to download all the plans, labels, templates, etc. Give a huge thank you to all the guys that have worked on this stuff over the years! Everything is here: http://www.hprops.com/labels/
http://www.gbprops.com
The main ingredients I used to build my pack are blue insulation foam (available at Home Depot), MDF wood, 1/8" thick pressboard and lots of epoxy. The ALICE pack frames can be purchased from Army surplus stores. Also locate a good electronics surplus store for a lot of the small parts.
http://www.gbprops.com
The main ingredients I used to build my pack are blue insulation foam (available at Home Depot), MDF wood, 1/8" thick pressboard and lots of epoxy. The ALICE pack frames can be purchased from Army surplus stores. Also locate a good electronics surplus store for a lot of the small parts.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
1
Jul 17, 2009. 8:21 PMdosp5
says:
How much did all of the materials and stuff cost you? Please seperate between suit, proton pack, wand , trap and googles.
Reply
23
Jul 18, 2009. 8:13 PM
Honus (author)
says:
Honus (author)
says:
Heck if I know- I made it several years ago. Much of it was made using materials I found in my garage. If I had to guess I probably had around $200 total in it.
Reply
 |
Add Comment
|
