3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Be an Aeronautical Scientist: Make your Own Jet Engine for a few Pennies.

Be an Aeronautical Scientist: Make your Own Jet Engine for a few Pennies.

You can make a real jet engine for five minute's work and the price of a spoonful of meths - how cool is that?!?

I doubt there's a better way to re-use all those jars under the sink. Much more fun than a trip to the bottle bank.
 
Remove these adsRemove these ads by Signing Up
 

Step 1Materials and equipment.

Materials and equipment.

Stuff I had lying around:

> Pasta sauce jar

> Matches

> A hammer

> A screw (it should have been a nail, but what the heck).

> A tin tray

Stuff I had to buy:

> Meths
« Previous StepDownload PDFView All StepsNext Step »
482 comments
1-40 of 482next »
May 27, 2012. 9:16 PMboom man56 says:
where did you git the Meths?
Feb 19, 2012. 8:37 AMThe Dark Lord says:
Have you tryed using this to propel a model rocket? ( Or other mode of transport?)
May 7, 2012. 3:15 AMBrianRandleas says:
I suspect that it is the air fuel mix that is killing it when you lay it on it's side. Try putting your hole near the top of the jar instead of the center and see if that works for you.
Nov 20, 2010. 7:45 AMandy55551 says:
is there a way so it doesn't brake at the end?
Feb 21, 2012. 12:05 PMskatattookid says:
i keep mine water cooled and also wrapped the glass in duct tape so if it does break its easy to clean up without getting cut. you can also just drill a hole in a can of broth and just use that.
May 7, 2012. 3:12 AMBrianRandleas says:
That was my thought on using a metal can as well. A beer can or soda can pierced from the bottom instead of "Popping the top" should work as well. If you can find a way to pull the bottom into a cone shape that should also give better results if your wanting even negligible thrust. If you are using a metal canister you should also be able to lay it on it's side. More important than the shape of the flame is the air to fuel mixture you are obtaining.
Oct 22, 2011. 5:55 PMorangetj says:
or possibly have a undamaged lid freeze the jar with the meths inside and then swap lids? but then again it might get hot fast and break sooner
Sep 12, 2011. 7:07 PMELITE-01 says:
I haven't tried this specifically,
but just as a reference to something I have done, unintentionally,
Rap a jar containing a candle in a cold, wet rag. The glass breaks pretty quickly, large cracks, some shattering, the works. so i'd assume that cold liquids, of any kind, with hot glass is a no go. 
Aug 14, 2011. 3:54 PMAldeas says:
Have you looked up the heller/lockwood version of the valveless pulsejet? That version uses a u shaped arrangement of the tube with and expanded combustion chamber to set up the harmaonic combustion pulse. one guy ran a gocart on one of these things using propane as a fuel.
Dec 24, 2011. 10:08 AMBitBoink says:
Ya I remember SRL (Survival Research Laboratories) did a pulse cart back in the 90's. The pipe was glowing bright orange-hot right behind his head if I my memory serves well ... was insane looking!
Mar 8, 2008. 6:22 PMyoukneephsycle says:
about to go try this with a beer can replacing the jar, thet way it cant smash and the hole is a pretty good size anyway.
May 7, 2012. 3:05 AMBrianRandleas says:
Here is an idea. Instead of "Popping the top" on the beer can, sacrifice one by popping a small hole in the bottom of the can instead. If you don't want to waste the beer use a soda can instead.
Apr 27, 2012. 5:17 PMZaphod Beetlebrox says:
I wonder if it work with a pop can. Or would the hole be to big.
Apr 28, 2012. 11:27 AMZaphod Beetlebrox says:
Thanks. saved me some experimenting. If I get one working I'll post a pic.
Apr 13, 2012. 7:23 PMCaptainMunz says:
Hey guys. I made one of these one time and I found that a good fuel to use is "HEET". It's used to start your car when its really cold, so its quite flammable and vaporizes well. Good luck!
Mar 19, 2012. 11:45 AMvincent7520 says:
Great ! …
I particularly like the trial and error part that shows that all does not go always well as one may think with most inst' here !!!!…

Nice chimes in the background of the las video.
Where is it ? … US or England ??…

Best wishes.
Mar 20, 2012. 3:00 PMvincent7520 says:
Aaah ! …
That was my first guess as I remember the bell choirs somewhere in England : doesn't exist much in any other place I visited.
his is very nice.

Now for the rocket science I hope that you won't feel hurt if I tell you that I would rather trust the americans for that matter …
But then again chimes are more beautiful and soul rewarding than anything than can be experienced on cape Kennedy … 

:D
Mar 4, 2012. 9:00 AMgenericusername5 says:
would this still work it the jar was tilted on its side?
Jan 13, 2009. 3:56 PMsceincedude11 says:
were do you get meth
Feb 21, 2012. 1:34 PMsomebody12345 says:
From a drug convention! (just kidding)
Mar 12, 2009. 5:47 PMfranklinonline says:
ask the police and youl be in jail because they think you mean methathetimene
Feb 3, 2009. 11:28 PMthe_mad_man says:
I've never seen purple metho before. the only metho I've ever seen is clear
Feb 5, 2009. 12:36 AMthe_mad_man says:
makes sense, i think petrol is purple as well
Feb 6, 2009. 8:57 PMthe_mad_man says:
confusing
Feb 21, 2012. 1:22 PMsomebody12345 says:
Would this qaulify as a pulse jet?
Jan 16, 2012. 8:48 PMthomasready says:
Your crazy I hope my grandkids don't see this killer hand remover
Feb 19, 2012. 10:51 AMThe Dark Lord says:
Maybe teach your grandkids basic safety...
1-40 of 482next »

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
831
Followers
142
Author:Kiteman(The Complete Kiteman Shop)
"Happiness is a shed full of power tools." If you need help around the site, or with a project, feel free to contact me.