With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
For valentines day I decided to make my valentine a picture frame that slowly pulses on and off (like a heart beat) when it is picked up. You can use ...
You will need only a minimum amount of tools and materials to create this project. I used 1/8" plexiglass I believe that I had in my garage. Beyond th...
First go make your basic template in photoshop. I found some heart brushes online and found a picture to fit. I then used the transform tool to create...
I used a nice bench grinder because I found a friend who could lend me his. If you dont have one you could use a dremel as I was planning on doing. It...
Now it was time to etch the larger heart so that it would show the text. This is where the laser cutter/engraver would have come in handy. I had a dre...
Now that most of the hard work is done it is time to finish up the picture so that we can snap it into place when the rest of the frame is done. I pic...
I picked up some red LEDs at my local electronic shop. These turned out to be pretty dim compared to other LEDs I have worked with. For a project like...
I will include the schematic again in this step for reference but once you have the parts it should take all of 5 minutes to put this together on a br...
After some testing and tucking the wires into place you should be about finished up. Not shown in the pictures are the opposite side of the bolts used...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »