With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
these earrings could be a present for a bride on her wedding. they are not hard to make but with these steps you will find it much easier to make. :) ...
To make these earrings you will need polymer clay to make the beads (i used fimo) you will need to colours of your choice i picked maroon and silver.
Roll the 2 colours into a sausage and then put them together and swirl them about then roll into a circle again and do the same thing to get a nice ef...
Then get the circle and make 4 small balls and 2 bigger ones.
With the wire that we will be using make a hole in every bead so that you can use them like normal beads.
Cook all the beads in the oven for 20 min at 110 degrees. They should look like this when cooked.
you will only need one big bead and 2 small ones to make 1 earring. you will also need some wire and glass beads.
On the longer piece of wire put on the glass bead then the small bead and then the glass bead the the bigger bead then the glass bead then the smaller...
On the shorter piece of wire put on some glass beads like in the photo.
you will now need some plyers and a crimp bead.
get the long wire and the short wire and put them together then get all the ends put the crimp bead on them then get a piece of end and make a loop wi...
With small nail scissors cut of the ends of the wire but not the loop.
attach a ring and earring to the loop with your plyers.
and there you have your beautiful earrings just make another one and you will have a pair and these can be a beautiful wedding present to a bride :D
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »