Instructables
Picture of Bed Tablet Holder
I have an android tablet and like to read at night before falling asleep. I created this so I can see the tablet hands free and have connected a Bluetooth mouse to turn the pages.
 
Remove these adsRemove these ads by Signing Up

Step 1: Get Pieces Together

Picture of Get Pieces Together
I had misc plumbing parts and pipe leftover from other projects. Cutting the pipes and using different fittings, this can be configured just about any way.

Step 2: Cutting The Fitting To Slide The Tablet In

Picture of Cutting The Fitting To Slide The Tablet In
14, 6:17 PM.jpg
14, 6:17 PM.jpg
14, 6:17 PM.jpg
14, 6:17 PM.jpg
14, 6:17 PM.jpg
Cut the fittings to accommodate the case you have.

Step 3: Attach To Bed Or Furniture

Picture of Attach To Bed Or Furniture
I drilled a small hole and attached this piece to the bed frame. Install where've you would like but do not glue so the stand can easily be removed.

Step 4: Enjoy!

Picture of Enjoy!
14, 6:17 PM.jpg
Enjoy hands free reading and on an android tablet, connect a Bluetooth keyboard or mouse for full functionality. Paint the whole unit It matches using a plastic paint. Once I am happy with this, I plan to make a steampunk version out of steel pipe and run the charging cable through for endless power. Comments and suggestions welcomed!

I love this idea! Nice job!