Introduction: Beer Case
Step 1: Lets Begin
First this was made for a six-pack size. I use a branch for the handle, plywood/pine and pallet wood.
Also the sides were ilustrated by a local traditional artist !
Step 2: Put It Together
I use a 1 1/2 drywall screws for this and my nail gun and of course. Glue
Step 3: Handle
I cut the branch to size so it can fit inside the case and put some spray lacquer to finish
Step 4: Finally
Finally a lil touch. And old vintage opener ...
We have a be nice policy.
Please be positive and constructive.