Introduction: Beer Holder

Picture of Beer Holder

These beverage holders are pretty cool for the garage, backyard, camping, or tailgating. The beverage holder can be disassembled and reassembled very quickly for taking it traveling. This was pretty easy to make, I used 3/4 inch PVC pipe but could used what ever you prefer. I used bigger automotive holders so that they can hold a beer when it is in a koozie.

order them now

Step 1: Tools and Supplies

Picture of Tools and Supplies


jig saw

sharpee marker

tape measure


screw driver


3/4 inch pvc pipe

3 "T" connectors 3/4 inch

5 3/4 inch pvc caps

2- automotive beverage holders


Step 2: Cut PVC and Build

Picture of Cut PVC and Build

Cutting and making this project is fairly straight foward. I cut the base pieces to be 6 inches long. You are going to need to cut 6 of theses pieces. Then i cut the long piece to the length of a good height to grab your beverage. I painted mine this is optional but I think makes it look a lot better. I screwed in my automotive holder's but might change it and use a bolt going threw both beverage holders so that I hand unscrew them for transportation.


JeffH53 (author)2016-01-28

Great Idea, you always need somewhere to put your beer while tailgating! We have a tailgating gear store Backyard TailGator, I might have to find something similar to add!

About This Instructable




Bio: I stopped helping people out on hear and sharing my ideas and projects because main stream companies just steal your idea and put it in ... More »
More by buildingandblogging:DIY Happy Gilmore Hockey Stick Putter Spinning Wheel85 Truck Modifications and Counting
Add instructable to: