Print PDF
Favorite
Email
Step 3Cutting the spoke nipple
This step is not necessary, but it is nice.
Clamp the spoke nipple in a vice or something.
Use a dremel with a cutoff wheel to cut the nipple just where the square part of the shaft ends. (Wear safety glasses!)
Save the cut-off ends, they will go inside the bottle cap uder the mirror, and act as a backing for the nipple on the outside to tighten against.
Clamp the spoke nipple in a vice or something.
Use a dremel with a cutoff wheel to cut the nipple just where the square part of the shaft ends. (Wear safety glasses!)
Save the cut-off ends, they will go inside the bottle cap uder the mirror, and act as a backing for the nipple on the outside to tighten against.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
