Print PDF
Favorite
Email
Step 16Using the Saw
Crosscutting with the miter gage is straightforward. In order to rip, use a framing square to locate and align a fence. Clamp it down. Remove the miter gage and square. Rip your work. You may add a support farther down the lathe bed near the tailstock, if needed.
This saw is a handy saw to use as a second saw when you need to make a quick cut; but your other, bigger saw is already set up for some very precise cuts. it is also a handy saw for someone with a lathe who is on a budget.
This saw is a handy saw to use as a second saw when you need to make a quick cut; but your other, bigger saw is already set up for some very precise cuts. it is also a handy saw for someone with a lathe who is on a budget.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
