Introduction: Benfoxg's Best Knex Gun. the M2 Carbine.

Here it is! this is the same gun as my first, but it has been update extremly. I'm not going to do a version history, because its way to long.

parts list. omg.

connectors:
yellow:118
green:10
red:22
blue 3d:9
white:9
orange:29
dark grey:2

rods:
green:119
white:70
blue:58
yellow:8
yellow bendy:5
blue bendy:7
grey bendy:2

other:
y hands:4
blue clips:1

warning. shoots 130 feet (wow)

Step 1: Front Barrel

needed to house the rubber bands and the be a barrel

1:what your making
2:make these
3:connect
4:add yellow and red buddies

Step 2: Main Body

Needed to hold the gun together and to be a body (no 6 pack included)

1:what your making
2:make 2
3:do and make all of this
4:add
5:connect

Step 3: Exo-frames

A new thing! strong exo frames! need so the gun doesn't make a big crunch noise and stop working.

1:makeith 2

Step 4: Little Parts

A very long yet easy step. make the gun work

1:make
2:make
3:make
4:make
5:make
6:make
7:make

too.....many.......makes!@!@!@!@!@

Step 5: Mag

fake but can be modded to hold extras. need to make it look like an m2 carbine

1:what your making
2:make 2
3:add to one
4:connect and donerony!

Step 6: Stock/handle

Needed to be able to hold teh gun.

1:what your making
2:make 2
3:make 3
4:connect
5:connect and you know what

Step 7: All Together

need to have the gun...lol

0:all the parts
1:front to body
2:exoframe to body
3:thing to body
4:thing to body
5:thing to body
6:thing and mag to body
7:handle/stock to body
8:thats one bad@** rifle you got there buddy!

Step 8: Loading

how to loa. hot glue is needed. tape will not work nearly as well. be carefull not to burn yourself, it hurts!

1-2:bullet. for make preformance, make tape or paper fins.
3:hot glue on green piece
4-5:loading

how to shoot: PULL TEH TRIGGAA!!!!!!!!!!!!!!!!!!!!!!!

Comments

author
LittleBilly (author)2016-08-23

This should be in the knex category. I found it in the Lego section

author
FuNbOy77 (author)2011-06-24

Do u only need 1 of those little black things for the whole gun??

author
SteampunkManiac (author)2011-02-23

FAAAAAAAAAAAAAAAAAAA(3 days later)AAAAAAAAAAAAAAAAAIIIIIIIIIIIIIIIIIIIIIIIILLLLLLLLLLLLLLLLLLLLLLl!!!!!!!!!!!!!!!!!!!

author
lowe (author)2010-04-17

I added a saftey switch that you cann turn on and off with a little dial.

author
The Great Knex Warrior (author)2009-01-12

SUPERB RIFLE! try making the same gun but with a working magazine and a ram. it probably wont be as powerful but it would make it look even more realistic!

author

actually, scratch that!!, its all about power!!

author
The Great Knex Warrior (author)2009-11-26

looks quite good!!!
i made a new sniper rifle, didnt have much pieces but:
it has 2 wheels in the stock to give it weight as i didnt have enough pieces. don't know how far it shoots yet but it can shoot through thick cardboard and come out the other side only a small bit slower.

012.JPG013.JPG
author
tthomasvd (author)2009-06-05

is that down that that yellow pice what is zoomet in a black round or an blue??

author
benfoxg (author)tthomasvd2009-06-06

It's a blue.

author
DIRTRACER39 (author)2008-12-05

I'm sure this is a amazing gun if it can shoot 130 feet, but i can't figure out how to build it, the pictures are to blurry and not descriptive enough, because of that only 3.5*

author
dynno97 (author)DIRTRACER392009-01-22

ditto

author
I_am_Canadian (author)2008-08-19

Try wiping all the condensation off the camera lens and try again. Nice gun though.

author
benfoxg (author)I_am_Canadian2008-08-25

if u like it please rate sum1 attacked this thing's rating. 1 0.5 star brings it to 2.7, it deserves more than that. and I'm getting good comments. its not a block trigger

author
happybirthday (author)benfoxg2008-12-22

i modified it to go 200 ft

author
benfoxg (author)happybirthday2008-12-22

vid!?

author
happybirthday (author)benfoxg2008-12-22

it uses the spriani firing system. ill have it up by tommarow

author
happybirthday (author)benfoxg2008-12-13

NEW!!! i made it so shells eject!!!

author
benfoxg (author)happybirthday2008-12-13

pic...?

author
happybirthday (author)benfoxg2008-12-14

really all i did was only hot glue the front and when you fired, the dark grey at the back would fly up

author
benfoxg (author)happybirthday2008-12-14

kool, a vid if possible?

author
happybirthday (author)benfoxg2008-12-14
here

author
benfoxg (author)happybirthday2008-12-14

it says its a private video

author
happybirthday (author)benfoxg2008-12-15

oh sorry 1 sec

author
happybirthday (author)benfoxg2008-12-14

sure okay give me a day or so

author
happybirthday (author)benfoxg2008-12-13

like this?

100_0466.jpg100_0465.jpg100_0464.jpg
author
benfoxg (author)happybirthday2008-12-13

no, the white connectors on the top are supposed to be 3 whites connected with a broken white rod. there is also a greed rod on top reinforced with hot glue

IMG_0411.JPG
author
happybirthday (author)benfoxg2008-12-13

yeah thats what i figure out nice gun 5/5 also the M1 garand 5/5 thanks for makeing them i like knex and WII so yea subscribed

author
happybirthday (author)benfoxg2008-12-13

can you please show more pics of the firing mech? is it 2 snowflakes on 1 yellow? what is in the middle to separate them?

author
I_am_Canadian (author)benfoxg2008-08-25

K

author
benfoxg (author)I_am_Canadian2008-08-25

tyvm

author

LOLZ You're right!

author
the-ruler-of-craziness (author)2008-11-30

5* its awesome oh btw im going to add my shotgun stock to this

author
benfoxg (author)2008-09-06

""""""""""""""""""""""""""""""""""""""""""testing"""""""""""""""""""""""""""""""""""""""""""

author
benfoxg (author)benfoxg2008-09-06

doesn't work... -.-

author
Bartboy (author)benfoxg2008-11-06

I am also testing

author
pie rulz (author)2008-10-01

ty i love the m2 carbine

author
freakinslop (author)2008-09-25

nice job dude! 5*s and fave

author
Soopah Steve (author)2008-09-10

wow.

author

Ps. 5 stars!

author
ksimonte (author)2008-09-06

awesome! I'm definately building this gun.

author
Skreetsha (author)2008-08-23

the pictures arent good but the gun looks nice

author
04bobby1 (author)2008-08-19

Dont be stupid it isnt the best and it isnt a bullet IT IS A ROUND

author

No, rounds are, a bullet (the projectile) and a cartridge containing an explosive substance (to propel the bullet) and a primer to ignite it. This is a projectile propelled using the contraction of rubber bands. But seeing as it is K'nex it doesn't really matter.

author
benfoxg (author)04bobby12008-08-19

okay...

author
apples!!!!! (author)benfoxg2008-08-19

It also cant have "zero friction".

author
benfoxg (author)apples!!!!!2008-08-19

I mean the barrel has no rubbing friction as the ROUND flies over instead of in it. of course it still has wind friction, though.

author
juneapaluna (author)2008-08-19

Pretty nice, looks like the real thing and the iron sights are really cool, 4.0

About This Instructable

4,596views

7favorites

License:

Bio: hey! i'm benfoxg... I am into runecape, cars, and knex gun making! I like knex bows, and swords. I don't like guns. they ... More »
More by benfoxg:The B.s.r Raptor... the longest range Knex sniper rifle in historyBenfoxg's best knex gun. the m2 carbine.knex m1 garand
Add instructable to: