loading
Picture of Benfoxg's best knex gun. the m2 carbine.
IMG_0395.JPG
Here it is! this is the same gun as my first, but it has been update extremly. I'm not going to do a version history, because its way to long.

parts list. omg.

connectors:
yellow:118
green:10
red:22
blue 3d:9
white:9
orange:29
dark grey:2

rods:
green:119
white:70
blue:58
yellow:8
yellow bendy:5
blue bendy:7
grey bendy:2

other:
y hands:4
blue clips:1

warning. shoots 130 feet (wow)
 
Remove these adsRemove these ads by Signing Up

Step 1: Front barrel

Picture of Front barrel
IMG_0400.JPG
IMG_0401.JPG
IMG_0402.JPG
needed to house the rubber bands and the be a barrel

1:what your making
2:make these
3:connect
4:add yellow and red buddies

Step 2: Main body

Picture of Main body
IMG_0403.JPG
IMG_0404.JPG
IMG_0405.JPG
IMG_0406.JPG
Needed to hold the gun together and to be a body (no 6 pack included)

1:what your making
2:make 2
3:do and make all of this
4:add
5:connect

Step 3: Exo-frames

Picture of exo-frames
A new thing! strong exo frames! need so the gun doesn't make a big crunch noise and stop working.

1:makeith 2

Step 4: Little parts

A very long yet easy step. make the gun work

1:make
2:make
3:make
4:make
5:make
6:make
7:make

too.....many.......makes!@!@!@!@!@

Step 5: Mag

Picture of mag
IMG_0415.JPG
IMG_0416.JPG
IMG_0417.JPG
fake but can be modded to hold extras. need to make it look like an m2 carbine

1:what your making
2:make 2
3:add to one
4:connect and donerony!

Step 6: Stock/handle

Picture of stock/handle
IMG_0419.JPG
IMG_0420.JPG
IMG_0421.JPG
IMG_0418.JPG
Needed to be able to hold teh gun.

1:what your making
2:make 2
3:make 3
4:connect
5:connect and you know what

Step 7: All together

need to have the gun...lol

0:all the parts
1:front to body
2:exoframe to body
3:thing to body
4:thing to body
5:thing to body
6:thing and mag to body
7:handle/stock to body
8:thats one bad@** rifle you got there buddy!

Step 8: Loading

Picture of loading
IMG_0437.JPG
IMG_0439.JPG
IMG_0440.JPG
IMG_0441.JPG
how to loa. hot glue is needed. tape will not work nearly as well. be carefull not to burn yourself, it hurts!

1-2:bullet. for make preformance, make tape or paper fins.
3:hot glue on green piece
4-5:loading

how to shoot: PULL TEH TRIGGAA!!!!!!!!!!!!!!!!!!!!!!!
1-40 of 46Next »
FuNbOy774 years ago
Do u only need 1 of those little black things for the whole gun??
FAAAAAAAAAAAAAAAAAAA(3 days later)AAAAAAAAAAAAAAAAAIIIIIIIIIIIIIIIIIIIIIIIILLLLLLLLLLLLLLLLLLLLLLl!!!!!!!!!!!!!!!!!!!
lowe5 years ago
I added a saftey switch that you cann turn on and off with a little dial.
SUPERB RIFLE! try making the same gun but with a working magazine and a ram. it probably wont be as powerful but it would make it look even more realistic!
actually, scratch that!!, its all about power!!
looks quite good!!!
i made a new sniper rifle, didnt have much pieces but:
it has 2 wheels in the stock to give it weight as i didnt have enough pieces. don't know how far it shoots yet but it can shoot through thick cardboard and come out the other side only a small bit slower.
012.JPG013.JPG
tthomasvd6 years ago
is that down that that yellow pice what is zoomet in a black round or an blue??
benfoxg (author)  tthomasvd6 years ago
It's a blue.
DIRTRACER396 years ago
I'm sure this is a amazing gun if it can shoot 130 feet, but i can't figure out how to build it, the pictures are to blurry and not descriptive enough, because of that only 3.5*
ditto
Try wiping all the condensation off the camera lens and try again. Nice gun though.
benfoxg (author)  I_am_Canadian6 years ago
if u like it please rate sum1 attacked this thing's rating. 1 0.5 star brings it to 2.7, it deserves more than that. and I'm getting good comments. its not a block trigger
i modified it to go 200 ft
benfoxg (author)  happybirthday6 years ago
vid!?
it uses the spriani firing system. ill have it up by tommarow
NEW!!! i made it so shells eject!!!
benfoxg (author)  happybirthday6 years ago
pic...?
really all i did was only hot glue the front and when you fired, the dark grey at the back would fly up
benfoxg (author)  happybirthday6 years ago
kool, a vid if possible?
here

benfoxg (author)  happybirthday6 years ago
it says its a private video
oh sorry 1 sec
sure okay give me a day or so
like this?
100_0466.jpg100_0465.jpg100_0464.jpg
benfoxg (author)  happybirthday6 years ago
no, the white connectors on the top are supposed to be 3 whites connected with a broken white rod. there is also a greed rod on top reinforced with hot glue
IMG_0411.JPG
yeah thats what i figure out nice gun 5/5 also the M1 garand 5/5 thanks for makeing them i like knex and WII so yea subscribed
can you please show more pics of the firing mech? is it 2 snowflakes on 1 yellow? what is in the middle to separate them?
K
benfoxg (author)  I_am_Canadian6 years ago
tyvm
LOLZ You're right!
5* its awesome oh btw im going to add my shotgun stock to this
benfoxg (author) 6 years ago
""""""""""""""""""""""""""""""""""""""""""testing"""""""""""""""""""""""""""""""""""""""""""
benfoxg (author)  benfoxg6 years ago
doesn't work... -.-
Bartboy benfoxg6 years ago
I am also testing
pie rulz6 years ago
ty i love the m2 carbine
freakinslop6 years ago
nice job dude! 5*s and fave
wow.
Ps. 5 stars!
ksimonte6 years ago
awesome! I'm definately building this gun.
Skreetsha6 years ago
the pictures arent good but the gun looks nice
1-40 of 46Next »