Introduction: Best Airsoft Grenade Ever and Very Simple!!!

Picture of Best Airsoft Grenade Ever and Very Simple!!!

This is the worlds best airsoft grenade. very powerfull, with about a 30 foot blast radius and very simple to make. i have done very extensive testing and have concluded that this is the best nade out there

Step 1: Get the Outer Shell

The outer shell is very simple, and consists of nothing more than a plastic baggie! you can get about 2 grenades from each baggie.
There is no pic cuz its pretty self explanatory.

Step 2: Fill the Grenade

Picture of Fill the Grenade

take about a hundred airsoft bb's (exact number dosent matter) and push all of them down into a corner of the plastic baggie.

Step 3: Tie Off the Grenade

Picture of Tie Off the Grenade

with all the bb's pushed into the corner, twist the baggie with the plastic pulled tight. it is verry important that the plastic is pulled very very very tight! then twist the baggie to hold the bb's in the corner. next wrap the twisted part in duct tape.

Step 4: Add a Firecraker and Finish

Picture of Add a Firecraker and Finish

with a knife or sissors, make a small insition neer the top of the grenade. insert a firecraker in this hole. paper fuses are generally best for air explotions while visco fuse are very well when you need more time to aim accuratly. have fun owning at airsoft!!!!

Step 5: Accesorys

Picture of Accesorys

no u may be wondering, how do i light this stupid thing??? problem solved! if u got a carabiner laying around and some rubber bands, simply tie the rubber bands around the carabiner in a polymer knot (the knot communly used to tie luggage tags on suitcases) or another knot. then duct tape the other end of the rubber band onto the lighter. (this only works with cigarette lighters) then clip the carabiner on your belt loop and away we go!!

Comments

Greywolfg (author)2016-02-16
Greywolfg (author)2016-02-16

itsjustaplasticbag stop, seriously. Spam..

itsjustaplasticbag (author)2014-12-02

its just a plastic bag...calm there commander

itsjustaplasticbag (author)2014-12-02

its just a plastic bag...calm there commander

itsjustaplasticbag (author)2014-12-02

its just a plastic bag...calm there commander

itsjustaplasticbag (author)2014-12-02

its just a plastic bag...calm there commander

Divine Insect (author)2010-05-30

I love this idea!  However, it only works if you live in an area where such firecrackers are legal to posses and use.  Before attempting this idea, you should check your local laws to make sure firecrackers are legal in the area you will be using them.  You should also avoid using them in areas which are prone to fires (either environmentally or flammable man-made structures).

Aron313 (author)Divine Insect2012-07-18

No such place haha. If a cop sees you with a firecracker. Unless hes nice he will probably need to talk with you... ect. But you are completely wrong about fires. The bang will put out any fire in a 1 or 2 inch radius. The best thing to do is use then only on your property or a well hidden place in the woods.

subsidedgibbon0 (author)Aron3132013-10-04

Actually Firecrackers and any rocket that flies are illegal in Oregon (It really sucks!)

We do it anyway though lol

Aron313 (author)subsidedgibbon02013-11-17

Yea thats pathetic that they are. Keep using them haha

coolananias101 (author)2013-07-26

cool

hobbyhawk32 (author)2010-12-31

could i use a Hammer cracker with out killing anyone

im sorry i don't know what that is. but a good way to tell is build the grenade, light the fuse and drop it. if you are alive, after the explotion, then it won't kill anybody.

Not the safest way. Better way is to drop it into a cardboard box. You are usally safe if it can only go threw one layer of cardboard. These layers are spaced out.

+1 to that. the dents it leaves in the cardboard are a great way to gauge the power as well. If i have more time or ever get around to it, I will add this to the 'ible and give you credit.

Thank you!

+1 to that. the dents it leaves in the cardboard are a great way to gauge the power as well. If i have more time or ever get around to it, I will add this to the 'ible and give you credit.

excactly what i did, i figuered there is only one way to be sure that it really works without a lawsuit so i lit it dropped it and covered my face, it works

jordanw343 (author)2009-09-04

Can you buy firecrackers in Australia

~Aeronous~ (author)jordanw3432009-09-09

oh and do you kno where to get bb/airsoft guns

walmart

no you cant. it doesnt exist in aus

Aron313 (author)~Aeronous~2012-07-18

Look it up on google!

tynow (author)~Aeronous~2011-04-23

poor aussies, airsoft is so fun

ohh i live in the U S A so suck it

djlewis725 (author)~Aeronous~2010-01-27

dicks sporting goods.

~Aeronous~ (author)jordanw3432009-09-09

no you cant i tried b4 u

Air_Assassin (author)2010-12-13

that is really awwwwwweeeeeeeesssssoommmmmmmeeeeeeeeeeee but dangerous
as ****

Aron313 (author)Air_Assassin2012-07-18

Ohhh God!

superawesomekid78 (author)2010-12-28

would an m5000 work for this? thats the only cracker i have.

Also you can take the paper and concrete off and it will be louder. Weird how that works.

Hahahahaha by firecrackers next time. They trick you into paying more for a regular firecracker. Its a little bit louder but exactly the same.

as long as it's not to big. if the diamater of the cracker is to big there will not be enough room for the bb's and the blast will be to thin. but yes, any cracker should work.

knifepyro (author)2009-06-25

how much does a firecracker cost and where can i get them

Aron313 (author)knifepyro2012-07-18

You also need a out-a-state license. Basically you have to travel to a different state to buy them.

imthatguy1125 (author)knifepyro2009-08-21

You get get 300 for a dollar at some places but for 100 yon will probably pay a couple bucks and you can get them only in some states

not fair i live in engand and cant get firecrackers

ol987986 (author)meat grinder2011-03-05

me 2 :(

Heh, I know how you feel. I live in Maine, and the fireworks laws here are pretty strict. Even Matchstick rockets have questionable legality.

As for the 'ible, it's fairly useful in it's simplicity. The actual design is perhaps a bit unimaginative. I feel like anyone could've thought of this. But hey, I didn't, and it works well, so you get a thumbs up from me.

knex_mepalm (author)meat grinder2010-02-18

improvise, get match heads and cinder blocks and light then throw and you get a nice bang thats what we do in aus, no guns, no fireworks over here, basically...nothing FUN

kjemielity (author)2012-04-01

kudos for the awesome instructable! we made a handful this morning with leftover crackers from 4th of july.my daughter is gonna try em out at the airsoft field today.there are a bunch of sea containers with doors n windows,she's gonna use em like flash-bangs. will post results later.

Grimmdeath (author)2011-11-29

If you use a bottle rocket it goes in the air then explodes thus there is a rain of bb's or if you get a certant type of bottle rocket it will hit the ground and explode thus you have a mortar

depends on the bottle rocket and how you position the grenade around it. most bottle rockets do not have enough thrust to propel an object of this size. nice try though.

XxyourshotxX (author)2011-04-14

dude its easier if you just get a firecracker and stick the bbs on the firecraker and lit it on

Paracord Ninja (author)2011-04-12

Wouldn't it be easier to just put the firecracker in first? anyway sweet nade

flamethrower1010 (author)2011-01-22

Now the trick is to put the firecracker in the bag first. this is so that you don't have to make that cut in the end which commonly leads to the bag tearing apart and rendering the grenade useless. what you do is you push the fuse through the corner of the bag, or cut a tiny hole in the corner, so that the firecracker is on the inside and only the fuse sticks out. Then fill it with bb's surrounding the firework and pull it tight. (see the pic) try it out sometime, i think you'll find that it works much better and is easier than your original process.

Pictures (forgot them the first time haha)

yes, this works fine with the smaller ccrakcers, but with the larger ones like i use i like to leave a little bit of the end sticking out. iv'e tried it this way but i usually have better results putting the cracker in last.

About This Instructable

56,705views

35favorites

License:

Bio: A mechanical engineering graduate from JBU, I enjoy putting motors on things that don't already have them, tinkering with small gas engines, airsoft, paintball ... More »
More by the mechanical engineer:Cell Phone controlled remote airsoft grenade detonatorArduino controlled LED light tube message boardspam any instant message with a simple program
Add instructable to: