Print PDF
Favorite
Email
Step 2Assembly
Center the tube on the Angle Steel and weld it to secure both together.
Cut your all thread rod to length, or use an all thread bolt.
Use either a wing nut on one end or both, or a nut on one end or both. It's importand that which ever you do, you make sure your bike is VERY secure before going down the road.
I attached mine to the inside of my bed on the tail gate. This makes it so i can attach and release my bike without having to get up into the bed. i just lower the tail gate. Now simply remove your front wheel and secure your bike front fork to the mount.
Cut your all thread rod to length, or use an all thread bolt.
Use either a wing nut on one end or both, or a nut on one end or both. It's importand that which ever you do, you make sure your bike is VERY secure before going down the road.
I attached mine to the inside of my bed on the tail gate. This makes it so i can attach and release my bike without having to get up into the bed. i just lower the tail gate. Now simply remove your front wheel and secure your bike front fork to the mount.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
