Print PDF
Favorite
Email
Step 3The "Hex" or "Allen" wrenches.
Needed are 2, 2.5, 3, 4, 5, and 6mm Allen wrenches. If you need a 8 mm use an adapter that can be purchased at a bike shop, or may come with an older multi-tool.
The only wrench in need of modification will be the 6mm. You need to make the long end short enough to fit into the Altoids tin. This step is easy, just use your bench grinder to trim back what is needed.
The only wrench in need of modification will be the 6mm. You need to make the long end short enough to fit into the Altoids tin. This step is easy, just use your bench grinder to trim back what is needed.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
