Print PDF
Favorite
Email
Step 6Bicycles can be hung cross ways, vertically or whatever you like
The pic below shows one of my bikes hung vertically. You can see the stand in this picture has a fairly thick block. That's because I made the all thread portion too long and it was flexing. Use proper 1/2" all thread rather than the end of a carriage bolt that I used here.
I've also hung bikes cross ways, put hooks on the stand for helmet and other gear. This method can be adapted to lots of other things (plant stand etc.). You could use the same technique with metal pipe and threaded pipe ends. Yes, you can figure that one out :-)
Hope this helps someone.
I've also hung bikes cross ways, put hooks on the stand for helmet and other gear. This method can be adapted to lots of other things (plant stand etc.). You could use the same technique with metal pipe and threaded pipe ends. Yes, you can figure that one out :-)
Hope this helps someone.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
