Print PDF
Favorite
Email
Step 30Mount Box ELectrical Components
Use some 8-32 machine screws that are 3/8" long. Also you need some lock washers.
You need two people to make this go quickly without dropping parts. Tile the electrical box up on end. Have one person hold the DC-to-AC Power Inverter part being mounted while you stand at the rear of the box and put the lock washer and the nut on.
Mount capacitor, terminal strip as shown in photos.
You need two people to make this go quickly without dropping parts. Tile the electrical box up on end. Have one person hold the DC-to-AC Power Inverter part being mounted while you stand at the rear of the box and put the lock washer and the nut on.
Mount capacitor, terminal strip as shown in photos.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![Voltage Regulated [5v] Bicycle Dynamo Light & USB Charger](http://img.instructables.com/files/deriv/FKR/TCHO/GSEEJZIP/FKRTCHOGSEEJZIP.SQUARE.jpg)
