Print PDF
Favorite
Email
Step 41Twist the Wires
The ten foot red and black wires are very easy to get tangled in so you need to twis them together using a drill as shown.
(1) Cut your wires to ten feet. If you want to cut them shorter you can do that.
(2) Tighten the chuck on the drill so the wires are securely held
(3) SLOWLY Rotate drill as shown in video. YOu need to have another person hold onto your box so you won't pull it off the table.
Insert ends of wire into drill.
(1) Cut your wires to ten feet. If you want to cut them shorter you can do that.
(2) Tighten the chuck on the drill so the wires are securely held
(3) SLOWLY Rotate drill as shown in video. YOu need to have another person hold onto your box so you won't pull it off the table.
Insert ends of wire into drill.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![Voltage Regulated [5v] Bicycle Dynamo Light & USB Charger](http://img.instructables.com/files/deriv/FKR/TCHO/GSEEJZIP/FKRTCHOGSEEJZIP.SQUARE.jpg)
