Print PDF
Favorite
Email
Step 5Remove Screws From Ascent Magnetic 3 Level Trainer Friction Roller
The Ascent Bike Trainer Stand comes with a friction roller that just wastes all of the useful energy you put out. Let's toss it in the scrap metal recycle bin.
At this point you will need to use the 5/32 Allen wrench shown below to remove the two screws shown at detail 1 and 2 in the picture. After you have removed the screws put them back in the silver barrel threaded barrel they came out of so you will not loose them.
At this point you will need to use the 5/32 Allen wrench shown below to remove the two screws shown at detail 1 and 2 in the picture. After you have removed the screws put them back in the silver barrel threaded barrel they came out of so you will not loose them.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![Voltage Regulated [5v] Bicycle Dynamo Light & USB Charger](http://img.instructables.com/files/deriv/FKR/TCHO/GSEEJZIP/FKRTCHOGSEEJZIP.SQUARE.jpg)
