Big 7-segment Digital Clock

Using only 2 capacitors, 3 resistors, 4 BIG seven-segment Display, 1 xtal, 2 switches ,and 1 Microcontroller PIC, you can build this Digital Led Clock main circuit.

you can use common anode or common cathode display, just select the display type. Here is the pinout information:(I have attach the all diagrams of parts and 7 segments)

I'm used 4x 6" big 7 segment display's.

BUY CLOCK Completed DIY BOARD : http://www.ebay.com/itm/270939743809?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1013wt_1265

Step 1: Simple paper copy schematic

here is the schematic and part list for the project.

IC - PIC16F628 / PIC16F84A

Comments

[natasha146]

is there any reason why you use a950 and c1815 transistor?can i replace it?

[rafanun]

hello,

can you send me full details of this clock?


[e-mail]

[slwthr]

please download the full project Clock.rar file in this page..Thanx!

[slwthr]

Sent a new design with hex code

[akarmakar]

Can you please send me the full details of this project with a proper circuit diagram ?

[e-mail]

[098765]

Can you send the list of the entire parts and entire circuit diagram of big seven segment clock to email below.
[e-mail]

[slwthr]

please download the full project Clock.rar file in this page..Thanx!

[asankasrimal]

Have you .hex File for PIC16F628

[slwthr]

Sorry!I heven't

[ramesh77]

Hi im interested on this very much.....can you please send me the circuit diagram and the .hex file if using PIC16F628A??

[e-mail]

[slwthr]

I don't have one for 16F628A..got one with 16f876

[dansan101]

Hi, im looking at replication this and i was wondering if you could tell me where you got the 7 segment displays, and if you could send me any of the relative informtion on the circuit. Cheers dan

[e-mail]

[slwthr]

Here is the link for Large 7 Segment Display..Bit expensive than in Sri Lanka market.

http://www.ebay.com/sch/i.html?_nkw=7+segment+large

http://www.ebay.com/itm/MEGA-LARGE-122x90mm-LED-7-SEGMENT-DISPLAY-Ultrabright-Green-Anode-LARGE-CLOCK-/150751509515?pt=LH_DefaultDomain_3&hash=item23197d7c0b#ht_2131wt_1265

And sent the mail with new design!

[gonzaled13]

Can you send the list of the entire parts and entire circuit diagram to email below.
I only have 4 pcs. of 3 inch displays, will the clock work if I use them instead of the bigger displays.

Email- [e-mail]

[slwthr]

Sent a new design with hex code

[bita98]

Hi, can u please send me the ciruict schematics and help me about how to connect the 7 segment displays to my microcontroller? I am using Bare_Bones Board as my microcontroller and was trying to use 74hc595 bcd, but my clock doesn't work.... Could u please help me

[slwthr]

Dear friend,I haven't try any microcontroller circuit using "Bare-Bones Board"..I only used PIC microcontroller and assembly or C compile software's. But Bare-Bones Board has a Atmel chip and its own software nah.

Why your clock not working? what trouble you guess? what schematic you want?

[Shabbar]

WOW =D

[ecinev]

hey..what about the hex code

[ecinev]

(removed by author or community request)

[slwthr]

Cool :)

[ecinev]

hey.. we're asked to built the same circuit in the josepino.. i tried your hex but it doesn't fit. .... Do you have the hex for it??? 2 capacitors, 7segment anodes, 10k resistor, pic16f84a, 2 switch... can you help me?? please...

[slwthr]

which display size u used? Big 7 segments or small one? Microcontroller Circuit is just simple like this.(From Josepino) but If you are using Big 7 Segment you must have to build Transistor array(darlington) like this diagrams.then couple with microntroller out puts to Big 7 segment display's.

Does your 7 segments displays any thing??

[cali909]

Hey wass up brother, man! that is a great digital 7 segment clock. I am interested after taking my first intro. class of engineering and about to complete my programming class. Arduino can I have a copy of you schematic and programming layouts to apply practice in my field.

[e-mail]

[ecinev]

small one...but the display is incorrect..

[slwthr]

please give me your email address,will massage you this clock modified version without transistors.(with darlington array IC control)

[ecinev]

(removed by author or community request)

[slwthr]

your welcome. I will send it soon.

[ecinev]

(removed by author or community request)

[slwthr]

u mean hex for this clock?? I have sent email yesterday,and find the attached zip file of Big Clock schematics and hex code). (from my hotmail : [e-mail]) so what diagram you want???

[ecinev]

i'm trying your hex for this diagram...just this diagram....

[ecinev]

i'm trying your hex for this diagram....just this diagram

[ecinev]

sorry for late thank you's...thanks again for helping me.. problem solved?!
hope you can help others as well.. :)

[sponcio]

hi sir! can you pls help me to do a 7 segment clock (the small one like a match box) i just need the seconds .. what IC and schematic diagram will I going to use ??

[vasanthsam22]

hi bro i'm doing my 3rd yr ece but doesnt knw the basics but i like to do this clock so plz help me bro give me guidance and sent all the info of this clock to me
plz.....
[e-mail]

[dhudzs]

cool..
can you send me full details of this clock,

[e-mail]

[saqlainmushtaq]

hi send me full details of this clock,


[e-mail]

[slwthr]

Sent!

[yixiong.86]

Hi, Can also send me "[e-mail]" thanks

[slwthr]

Sent a new design with hex..