Bike Tree

Step 2 Decking and post

Place one bit of decking upside down on the floor and place the other on top of it. Make sure to orient the decking so as to create two tunnels. This is where you are going to slide the ballast in later. Next line up where you want the fence post support to go. Make sure it overlaps two different bits of wood as the stress from the bikes may be too much for one bit of wood. We also put some extra screws into the decking to reinforce it. With the bikes hanging off the front of the fence post, there's going to be quite a lot of force focused on the support, so make sure it's nice and tight.