Print PDF
Favorite
Email
Step 4Attaching the flip-switches
Tape a green LED to the side of the flip switch with electrical tape. Then solder it to the switch. I did this because you know when which arrow is on or off. The green LED shines with the red ones.
Attach the LED to the switch as it shows on the picture. Then tape it to the handlebars. You can put it wherever you want, but its easiest to have it at the end.
Attach the LED to the switch as it shows on the picture. Then tape it to the handlebars. You can put it wherever you want, but its easiest to have it at the end.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
