Print PDF
Favorite
Email
Step 4Setting the Time
I drilled three holes to left side of box for time setting buttons. Hours, minutes and seconds. There is also one button on other side, which is set-button.
When I put the power plug in the LEDs start blinking. Then I press the set-button to down and keep it down. Same time I adjust the right time to the clock with the other side buttons. When the time is correct, it is time to release the set-button.
When I put the power plug in the LEDs start blinking. Then I press the set-button to down and keep it down. Same time I adjust the right time to the clock with the other side buttons. When the time is correct, it is time to release the set-button.
| « Previous Step | Download PDFView All Steps | Next Step » |
http://www.roleepolee.com/products/roleepolee/microswitch6167a.jpg
If so, how would the seconds 4024 counter get pulses when you release this button?