Introduction: Binary LED With Raspberry Pi

Picture of Binary LED With Raspberry Pi

This project will switch on/off two LED lights using raspberry pi. The control of light can be done by python code.

Step 1: Prerequisites ..

  1. Raspberry pi
  2. wires
  3. Two LEDs
  4. Two resistors

Connect the LEDs with 3 and 8 pins of raspberry b+ model. Ground them as in the video. Use resistors after the LEDs to protect your raspberry. Then use python programming to switch on the LED in accordance with the time you supply. You can find the code here

Also feel free to ask any questions.

Comments

CS23 (author)2016-04-13

cool

About This Instructable

654views

8favorites

License:

More by DhrubaK:Binary LED With Raspberry Piraspberry pi LED project
Add instructable to: